Nontoxic, Biodegradable Hyperbranched Poly(ß-amino ester)s for Efficient siRNA Delivery and Gene Silencing.

RNA interference (RNAi)-mediated gene silencing is a promising therapeutic approach to treat various diseases, but safe and efficient delivery remains a major challenge to its clinical application. Non-viral gene vectors, such as poly(ß-amino esters) (pBAEs), have emerged as a potential candidate due to their biodegradability, low toxicity profile, ease of synthesis, and high gene transfection efficiency for both DNA and siRNA delivery. However, achieving significant gene silencing using pBAEs often requires a large amount of polymer carrier (with polymer/siRNA weight ratio >100) or high siRNA dose (>100 nM), which might potentially exacerbate toxicity concerns during delivery. To overcome these barriers, we designed and optimized a series of hyperbranched pBAEs capable of efficiently condensing siRNA and achieving excellent silencing efficiency at a lower polymer/siRNA weight ratio (w/w) and siRNA dose. Through modulation of monomer combinations and branching density, we identified the top-performing hyperbranched pBAEs, named as h(A2B3)-1, which possess good siRNA condensation ability, low cytotoxicity, and high cellular uptake efficiency. Compared with Lipofectamine 2000, h(A2B3)-1 achieved lower cytotoxicity and higher siRNA silencing efficiency in HeLa cells at a polymer/siRNA weight ratio of 30 and 30 nM siRNA dose. Notably, h(A2B3)-1 enhanced the gene uptake in primary neural cells and effectively silenced the target gene in hard-to-transfect primary cortical neurons and oligodendrocyte progenitor cells, with gene knockdown efficiencies of 34.8 and 53.4% respectively. By incorporating a bioreducible disulfide compartment into the polymer backbone, the cytocompatibility of the h(A2B3)-1 was greatly enhanced while maintaining their good transfection efficiency. Together, the low cytotoxicity and high siRNA transfection efficiency of hyperbranched h(A2B3)-1 in this study demonstrated their great potential as a non-viral gene vector for efficient siRNA delivery and RNAi-mediated gene silencing. This provides valuable insight into the future development of safe and efficient non-viral siRNA delivery systems as well as their translation into clinical applications.

Recombinant perlecan domain V covalently immobilized on silk biomaterials via plasma immersion ion implantation supports the formation of functional endothelium.

Strategies to promote rapid formation of functional endothelium are required to maintain blood fluidity and regulate smooth muscle cell proliferation in synthetic vascular conduits. In this work, we explored the biofunctionalization of silk biomaterials with recombinantly expressed domain V of human perlecan (rDV) to promote endothelial cell interactions and the formation of functional endothelium. Perlecan is essential in vascular development and homeostasis and rDV has been shown to uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions, both key contributors of vascular graft failure. rDV was covalently immobilized on silk using plasma immersion ion implantation (PIII), a simple one-step surface treatment process which enables strong immobilization in the absence of chemical cross-linkers. rDV immobilization on surface-modified silk was assessed for amount, orientation, and bio-functionality in terms of endothelial cell interactions and functional endothelial layer formation. rDV immobilized on PIII-treated silk (rDV-PIII-silk) supported rapid endothelial cell adhesion, spreading, and proliferation to form functional endothelium, as evidenced by the expression of vinculin and VE-cadherin markers. Taken together, the results provide evidence for the potential of rDV-PIII-silk as a biomimetic vascular graft material.

Surface Biofunctionalization of Silk Biomaterials Using Dityrosine Cross-Linking.

Biofunctionalization of silk biomaterial surfaces with extracellular matrix (ECM) molecules, cell binding peptides, or growth factors is important in a range of applications, including tissue engineering and development of implantable medical devices. Passive adsorption is the most common way to immobilize molecules of interest on preformed silk biomaterials but can lead to random molecular orientations and displacement from the surface, limiting their applications. Herein, we developed techniques for covalent immobilization of biomolecules using enzyme- or photoinitiated formation of dityrosine bonds between the molecule of interest and silk. Using recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) as a model molecule, we demonstrated that rDV can be covalently immobilized via dityrosine cross-linking without the need to modify rDV or silk biomaterials. Dityrosine-based immobilization resulted in a different molecular orientation to passively absorbed rDV with less C- and N-terminal region exposure on the surface. Dityrosine-based immobilization supported functional rDV immobilization where immobilized rDV supported endothelial cell adhesion, spreading, migration, and proliferation. These results demonstrate the utility of dityrosine-based cross-linking in covalent immobilization of tyrosine-containing molecules on silk biomaterials in the absence of chemical modification, adding a simple and accessible technique to the silk biofunctionalization toolbox.

Bioengineering silk into blood vessels.

The rising incidence of cardiovascular disease has increased the demand for small diameter (<6 mm) synthetic vascular grafts for use in bypass surgery. Clinically available synthetic grafts (polyethylene terephthalate and expanded polytetrafluorethylene) are incredibly strong, but also highly hydrophobic and inelastic, leading to high rates of failure when used for small diameter bypass. The poor clinical outcomes of commercial synthetic grafts in this setting have driven significant research in search of new materials that retain favourable mechanical properties but offer improved biocompatibility. Over the last several decades, silk fibroin derived from Bombyx mori silkworms has emerged as a promising biomaterial for use in vascular applications. Progress has been driven by advances in silk manufacturing practices which have allowed unprecedented control over silk strength, architecture, and the ensuing biological response. Silk can now be manufactured to mimic the mechanical properties of native arteries, rapidly recover the native endothelial cell layer lining vessels, and direct positive vascular remodelling through the regulation of local inflammatory responses. This review summarises the advances in silk purification, processing and functionalisation which have allowed the production of robust vascular grafts with promise for future clinical application.

Effect of Recombinant Human Perlecan Domain V Tethering Method on Protein Orientation and Blood Contacting Activity on Polyvinyl Chloride.

Surface modification of biomaterials is a promising approach to control biofunctionality while retaining the bulk biomaterial properties. Perlecan is the major proteoglycan in the vascular basement membrane that supports low levels of platelet adhesion but not activation. Thus, perlecan is a promising bioactive for blood-contacting applications. This study furthers the mechanistic understanding of platelet interactions with perlecan by establishing that platelets utilize domains III and V of the core protein for adhesion. Polyvinyl chloride (PVC) is functionalized with recombinant human perlecan domain V (rDV) to explore the effect of the tethering method on proteoglycan orientation and bioactivity. Tethering of rDV to PVC is achieved via either physisorption or covalent attachment via plasma immersion ion implantation (PIII) treatment. Both methods of rDV tethering reduce platelet adhesion and activation compared to the pristine PVC, however, the mechanisms are unique for each tethering method. Physisorption of rDV on PVC orientates the molecule to hinder access to the integrin-binding region, which inhibits platelet adhesion. In contrast, PIII treatment orientates rDV to allow access to the integrin-binding region, which is rendered antiadhesive to platelets via the glycosaminoglycan (GAG) chain. These effects demonstrate the potential of rDV biofunctionalization to modulate platelet interactions for blood contacting applications.

Biomimetic silk biomaterials: Perlecan-functionalized silk fibroin for use in blood-contacting devices.

Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain, and compared to physisorbed and carbodiimide immobilized rDV. Untreated and treated silk biomaterials were examined for interactions with blood components with varying degrees of complexity, including isolated platelets, platelet rich plasma, blood plasma, and whole blood, both under agitated and flow conditions. rDV-biofunctionalized silk biomaterials were shown to be blood compatible in terms of platelet and whole blood interactions and the PIII treatment was shown to be an effective and efficient means of covalently immobilizing rDV in its bioactive form. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications. STATEMENT OF SIGNIFICANCE: Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V (rDV) of the human basement membrane proteoglycan perlecan towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications.

Dry Surface Treatments of Silk Biomaterials and Their Utility in Biomedical Applications.

Silk-based materials are widely used in biomaterial and tissue engineering applications due to their cytocompatibility and tunable mechanical and biodegradation properties. Aqueous-based processing techniques have enabled the fabrication of silk into a broad range of material formats, making it a highly versatile material platform across multiple industries. Utilizing the full potential of silk in biomedical applications frequently requires modification of silk's surface properties. Dry surface modification techniques, including irradiation and plasma treatment, offer an alternative to the conventional wet chemistry strategies to modify the physical and chemical properties of silk materials without compromising their bulk properties. While dry surface modification techniques are more prevalent in textiles and sterilization applications, the range of modifications available and resultant changes to silk materials all point to the utility of dry surface modification for the development of new, functional silk biomaterials. Dry surface treatment affects the surface chemistry, secondary structure, molecular weight, topography, surface energy, and mechanical properties of silk materials. This Review describes and critically evaluates the effect of physical dry surface modification techniques, including irradiation and plasma processes, on silk materials and discusses their utility in biomedical applications, including recent examples of modulation of cell/protein interactions on silk biomaterials, in vivo performance of implanted biomaterials, and applications in material biofunctionalization and lithographic surface patterning approaches.

Silk fibroin photo-lyogels containing microchannels as a biomaterial platform for in situ tissue engineering.

The biophysical properties of biomaterials are key to directing the biological responses and biomaterial integration and function in in situ tissue engineering approaches. We present silk photo-lyogels, a biomaterial format fabricated using a new combinatorial approach involving photo-initiated crosslinking of silk fibroin via di-tyrosine bonds followed by lyophilization to generate 3D, porous lyogels showing physical properties distinct to those of lyophilized silk sponges or silk hydrogels. This fabrication approach allowed introduction of microchannels into 3D constructs via biofabrication approaches involving silk crosslinking around an array of 3D printed photocurable resin pillars to generate parallel channels or around a 3D printed sacrificial thermosensitive gel to generate interconnected channels in a rapid manner and without the need for chemical modification of silk fibroin. The presence of interconnected microchannels significantly improved migration of endothelial cells into 3D photo-lyogels in vitro, and tissue infiltration, photo-lyogel integration, and vascularization when implanted in vivo in a mouse subcutaneous model. Taken together, these findings demonstrate the feasibility and utility of a new combinatorial fabrication approach for generation of silk biomaterials that support cell interactions and implant integration for in situ tissue engineering approaches.

Plasma Ion Implantation of Silk Biomaterials Enabling Direct Covalent Immobilization of Bioactive Agents for Enhanced Cellular Responses.

Silk fibroin isolated from Bombyx mori cocoons is a promising material for a range of biomedical applications, but it has no inherent cell-interactive domains, necessitating functionalization with bioactive molecules. Here we demonstrate significantly enhanced cell interactions with silk fibroin biomaterials in the absence of biofunctionalization following surface modification using plasma immersion ion implantation (PIII). Further, PIII treated silk fibroin biomaterials supported direct covalent immobilization of proteins on the material surface in the absence of chemical cross-linkers. Surface analysis after nitrogen plasma and PIII treatment at 20 kV revealed that the silk macromolecules are significantly fragmented, and at the higher fluences of implanted ions, surface carbonization was observed to depths corresponding to that of the ion penetration. Consistent with the activity of radicals created in the treated surface layer, oxidation was observed on contact with atmospheric oxygen and the PIII treated surfaces were capable of direct covalent immobilization of bioactive macromolecules. Changes in thickness, amide and nitrile groups, refractive index, and extinction coefficient in the wavelength range 400-1000 nm as a function of ion fluence are presented. Reactions responsible for the restructuring of the silk surface under ion beam treatment that facilitate covalent binding of proteins and a significant improvement in cell interactions on the modified surface are proposed.